HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

1/10Gb VC-Enet - PXE DHCP Fails

 
jsu
Advisor

1/10Gb VC-Enet - PXE DHCP Fails

Sorry for the seemingly duplicate post.

We have a 1/10Gb VC-Enet in a C7000 that is failing to pass through DHCP requests during PXE boot. The 1/10Gb VC-Enet module is set up w/ simple networking and a single uplink. The upstream switch is a Procurve 6400cl that is VLAN'd with 5 subnets, but only one VLAN is untagged to the uplink CX4 port.

When an already imaged W2K3 blade is pushed into the enclosure, the 1/10Gb VC-Enet works fine and the blade has connectivity through NIC1 (default PXE).

The PXE server is running on the subnet, and we have verified that it is dishing up addresses correctly to a 2900-48 that is on the same subnet, connected to the same 6400cl.

We haven't tried forcing a VLAN on the 1/10Gb VC-Enet, should we? Or is there something else?
3 REPLIES
JKytsi
Honored Contributor

Re: 1/10Gb VC-Enet - PXE DHCP Fails

How is your server profile configured for PXE usage ? Is it on
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
jsu
Advisor

Re: 1/10Gb VC-Enet - PXE DHCP Fails

Our PXE installation was misconfigured. Reinstalling RDP solved our problems.
jsu
Advisor

Re: 1/10Gb VC-Enet - PXE DHCP Fails

PXE and RDP Reinstalled.