HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

10 GB Ethernet BL-c Switch compatibility with BL460c G6

 
SOLVED
Go to solution
juniper27
Occasional Contributor

10 GB Ethernet BL-c Switch compatibility with BL460c G6

The BL460c G6 blade server will not port map to the 10gb switch but it will port map to a Gbe2c switch i have.  The bl460c has embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter but the documentation for the BL-c switch says it works with servers that has HP NC512.

 

Do i need a NC512 mezzanine card for the bl460c or am i missing something?

2 REPLIES
Cederberg
Honored Contributor

Re: 10 GB Ethernet BL-c Switch compatibility with BL460c G6

Hi.

 

Some stupid questions but the interconnects are placed in interconnectbay Bay 1 and 2 right?

 

Have you tried upgrading to latest Firmware on the BL460c G6 Nics?

 

try upgrading the switch aswell.

juniper27
Occasional Contributor
Solution

Re: 10 GB Ethernet BL-c Switch compatibility with BL460c G6

It goes into bay 5/6 or 7/8.  Found the answer on another post and I will need a mezzanine card.