BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

6120G/XG Blade Switch Redundancy

DThomson_1
Advisor

6120G/XG Blade Switch Redundancy

Hi

I am busy testing the redundancy between 2 6120G/XG Blade Switch's ive just installed.

When i switch one of them off, the 2nd switch does not take up the network of the test blade.

The port mappings look correct.

Is there something on the switch that has to be enabled ?

Regards
2 REPLIES
DThomson_1
Advisor

Re: 6120G/XG Blade Switch Redundancy

Problem solved.

This was only an issue with ESX. We teamed the nics and it is now working.
DThomson_1
Advisor

Re: 6120G/XG Blade Switch Redundancy

As above.