BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Add/Change Date&time P-Class Chassis

Hans Minten
Occasional Contributor

Add/Change Date&time P-Class Chassis

is there a way to change/add time on a P-Class blade chassis, this because we no don't got a date/time stamp in the IML logs.

Thanks
3 REPLIES
Matti_Kurkela
Honored Contributor

Re: Add/Change Date&time P-Class Chassis

Do you have the Proliant Support Pack installed, or the equivalent drivers installed as separate packages? Which OS are you running?

MK
MK
Blazhev_1
Honored Contributor

Re: Add/Change Date&time P-Class Chassis

Hi,

there is no way to enter time in the management module. You can connect via serial cable and then Hyperterminal, but there are options for the power infrastructure, serial number, see if any faults ....

imho the IML time has nothing to do with the management module. Update server BIOS, ilo Firmware and install PSP like already advised and for sure you should have the time stamps.

Regards
Hans Minten
Occasional Contributor

Re: Add/Change Date&time P-Class Chassis

Server is running VMWare ESX 3.X

will try to install all psp for the servers.

will get back on it. any other response will be welcom.