Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL 465 G7 / C3000 - Windows 2003 Standard - install issues BSOD

p33tew
Occasional Advisor

BL 465 G7 / C3000 - Windows 2003 Standard - install issues BSOD

Installing windows 2003 std sp1 on a bl 465 g7 and during setup/install of windows I got  a BSOD  (see pic)

 

I know that there is a critical update for storage controller HPCISSS2.sys but I need to install  recovery console for windows 2003 sp1 then sp2. During install of sp2 I had a BSOD!!!

I have also had windows EMS freeze and also multiple BSOD and then windows installs finally...

 

However this is a major waste of time of having to rebuild ...there must be a simple explaination...

 

I had reset the blade to factory default and reinstalled with different results...freezing, BSOD...

Firmware 9.30, SmartStart 8.70 x86- installing via ILO in blade chassis.

Any suggestions...

 

 

 

 

 

thanks
2 REPLIES
Casper42
Trusted Contributor

Re: BL 465 G7 / C3000 - Windows 2003 Standard - install issues BSOD

Slipstream the latest drivers and SP into a single installer and use that.

p33tew
Occasional Advisor

Re: BL 465 G7 / C3000 - Windows 2003 Standard - install issues BSOD

Or turn off EMS in BIOS and it works.

thanks