BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL35p sleeve presence?

 
idc_1
Occasional Visitor

BL35p sleeve presence?

Hi,

We have a p-Class enclosure. It works fine with BL20p blades.

We also have single BL35p server. Neither the sleeve or the BL35p is recognised (on the serial console) when it is plugged in. There appears to be no power to it. I'm trying to figure out if this is a problem with the sleeve or the blade.

We have tried multiple bays. All the firmware on everything is as up to date as possible (except the BL35p, which I can't access to update). The BL20ps all seem to work fine.

Thanks for any help.

Ian