BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL40c g1 boot error...firmware?

 
SOLVED
Go to solution
mza
Occasional Visitor

BL40c g1 boot error...firmware?

Whenever I reboot one of my c7000 BL460c G1 blades, the blade goes down smoothly, but on powerup will stall and flash the red status light. Physically reseating the blade in the chassis is the only way to recover. The only hint I have is in the IML logs referring to recovering a downed network interface. I have the following firmare loaded:

OA: 2.25
ILO: 1.5
ROM: I15 4/1/2008

Please advice
Thanks,
mza
2 REPLIES
JKytsi
Honored Contributor
Solution

Re: BL40c g1 boot error...firmware?

Update BIOS to latest (all servers in enclosure)
update ILO to latest (all servers in enclosure)
Update OA to latest (all servers in enclosure)
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
JKytsi
Honored Contributor

Re: BL40c g1 boot error...firmware?

And as a new user to forums. Please assign points to answers people provide to YOU. You can rate the answers by assinging points.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi