BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460 G6 "Machine Check Exception"

 
David Orwig
Regular Advisor

BL460 G6 "Machine Check Exception"

Having issues with a 460G6 connected to a flex-10 in a C7000 chassis. Trying to reload using RDP (had success in the past) but now we started getting a PXE-E63 error message(Error while initiating the NIC). After several attempts and reconfigures of the flex-10 server profiles we now get "Uncorectable Processor Machine Check Exceprtion" during post. This is NOT a PXE / RDP issuem,we can still load other blades in this enclosure. Any Ideas?? I'm planning on replacing the system board first.
2 REPLIES
Florian Heigl (new acc)
Honored Contributor

Re: BL460 G6 "Machine Check Exception"

Well guessing by the message the CPU would be the first thing to replace. :)
yesterday I stood at the edge. Today I'm one step ahead.
David Orwig
Regular Advisor

Re: BL460 G6 "Machine Check Exception"

Replaced the system board, all is good.