1748011 Members
4546 Online
108757 Solutions
New Discussion юеВ

Re: BL460 Health LED

 
LinuxMaster
Occasional Contributor

BL460 Health LED

I have nine BL460c blade servers in two c7000 enclosures
During the health check I found that some of blade servers have Health LED is flashing red,
so I make a check on the OA Web Console and I didnтАЩt have noticed any error or warning messages.
I make shut down but the Health LED is still flashing red.
the blade servers is working normally
4 REPLIES 4
JKytsi
Honored Contributor

Re: BL460 Health LED

Hi,

Try this...

SSH to OA IP

type RESET server [baynumber]
it will do total reset for the specified server.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
it61066
Frequent Advisor

Re: BL460 Health LED

Hi,

We have 29 BL460c servers with MS Windows 2003. The health check LED lits red for any server when shutdown or restart.
After that, it could not power on until unplug/replug in its bay.

Any solution please?
HPE ASE Proliant-Synergy & Storage Certified Engineer
Clustering & Virtualization Support (Microsoft & Vmware)

shill
Occasional Collector

Re: BL460 Health LED

Did you ever find a solution for this
it61066
Frequent Advisor

Re: BL460 Health LED

Hello,

It has been resolved since a long time after OA and firmware upgrade on the servers using HP Firmware maintenance CD (downloadable from HP drivers page).
HPE ASE Proliant-Synergy & Storage Certified Engineer
Clustering & Virtualization Support (Microsoft & Vmware)