BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460 Mezzanine Slot 2 can't connect to Interconnect Switch 3

 
Demention
Occasional Visitor

BL460 Mezzanine Slot 2 can't connect to Interconnect Switch 3

Hi

I have 2 Mezzanine nic's and on Mezzanine Slot 2 the second port won't connect to switch 3.

I can see I should have a 4. switch in interconnect 4 slot, but there must be a way to force the Mezzanine Slot 2 NIC to connect to the 3. switch.

Please help..

Best Regards
Anders
3 REPLIES
Demention
Occasional Visitor

Re: BL460 Mezzanine Slot 2 can't connect to Interconnect Switch 3

Forgot to say that it is a BL460 on a c3000 blade.
The Brit
Honored Contributor

Re: BL460 Mezzanine Slot 2 can't connect to Interconnect Switch 3

Anders,
I think you will find that Mezzanine Slot 2 maps to IC modules (slots) 4 & 5.

Dave
Raghuarch
Honored Contributor

Re: BL460 Mezzanine Slot 2 can't connect to Interconnect Switch 3

There is no way you can force the Mezzanine Slot 2 NIC to connect to the 3 switch.

If you are using C3000 the MEZZ NIC2 will map to interconnect 3 and 4.

Refer to this for more details or Click on the help Page of OA Port mapping.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01204885/c01204885.pdf