BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460C could not connect to EVA

SOLVED
Go to solution
junhua song
Occasional Visitor

BL460C could not connect to EVA

I have a problem ,pls help!

The server is BL460C with QMH2462 4GB fc card
software:win2k server sp2 + kb932755
Qlogic driver 9.1.3.16
I hvae installed commandview eva v6.02 on this server
The problem is server can't connect to EVA4K as a SMA,command view can't find a hsv controller.
what can I do?
5 REPLIES
Ivan Ferreira
Honored Contributor

Re: BL460C could not connect to EVA

Check your connection to the SAN and zoning configuration. Ensure that both are correctly setup.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
junhua song
Occasional Visitor

Re: BL460C could not connect to EVA

Yes,the HBAs connected directly to the interconnect bay of the bladeserver and it seems OK in onboard administrator.
There is no zone configuared on the san switchs.

In the Attachment,the blade I want to use as a SMA at bay14
JKytsi
Honored Contributor
Solution

Re: BL460C could not connect to EVA

Hi,
Have You checked the port licence status from your SAN switch ? You have 4/12 license in there.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
junhua song
Occasional Visitor

Re: BL460C could not connect to EVA

Yaah,this is the problem! Thank you very much.
BTW,the total 12 aviable ports was defined as 4 external and 8 internal or dynamic assigned(cloud it be 10 for blade and 2 for eva)?
Another question: there is 8 externel fc port on the rear of the switch, cloud I buy a license then upgrade to 4/24 switch?

Happy chinese mid-autumn festival!
JKytsi
Honored Contributor

Re: BL460C could not connect to EVA

Hi,

Port licensen can arranged how You want, but total port count is 12. So for example 11 blades and 1 external or 10 blades and 2 external ports at same time.
You can buy addtional port licence to upgrade your 4/12 license to 4/24.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi