HPE Community
BladeSystem - General
1753435 Members
4739 Online
108794 Solutions
New Discussion

BL460c G1 - Health led is amber flashing

 
Evgeny Bogatov
New Member

‎04-23-2010 03:24 AM

‎04-23-2010 03:24 AM

BL460c G1 - Health led is amber flashing

We have a BL460c functionig correctly.
However the health led is Amber Flashing.

Everything is working and iLO as well as HP tooling reports no error. I looked through all the available logs - no errors.

Still the health led is Amber Flashing.
Is there an explanation? What does this mean?

P.S.: Recently, all logs have been cleared, but the problem is still actual. Sorry for my english
0 Kudos
Reply
1 REPLY 1
WFHC-WI
Honored Contributor

‎04-23-2010 08:03 AM

‎04-23-2010 08:03 AM

Re: BL460c G1 - Health led is amber flashing

hi evgeny,

There is nothing in the integrated management log (IML)? Power down and re-seat the blade. Also, check that your system ROM, iLO, and Power Management Controller firmware is up-to-date.

good luck
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.