BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c G1 will not Boot

Holger Fabian
Occasional Advisor

BL460c G1 will not Boot

Hi all

The problem: I have an BL460cG1 with 32 Gb Ram 2x Quad core and E200i Smart Controller and TWO 72GB 10K Dualport HDD`s.

When i install W2K8 or W2K3 the installation is fine but the Server will not Boot from the HDD`s. The Error is: Can not find Winloader.exe or Ntoskernel.

Linux OS works fine with Dualport HDD`s.

When i change the HDD`s as Singleport HDD`s The installation of Windows is fine and the Server can boot.

Quickspec`s say`s that Dualport HDD`s are Supportet.

Any Idea??

Thanks for Feedback.

@The FW Revisions are the newest from FW CD 8.70

Holger
3 REPLIES
JKytsi
Honored Contributor

Re: BL460c G1 will not Boot

Did You install Windows with SmartStart CD ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Holger Fabian
Occasional Advisor

Re: BL460c G1 will not Boot

No. I will Test it.(there is no Information, that you MUST Install Windows with Smartstart!!!)

The simplified way, the dual port HDD `s into single port HDD` s is to replace.

Thanks for Help
Holger Fabian
Occasional Advisor

Re: BL460c G1 will not Boot

dsgasd