BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c G7 cannot power on

 
SOLVED
Go to solution
Thaufik
Occasional Advisor

BL460c G7 cannot power on

Hi All,

I Have one enclosure c7000 with existing BL460c G6 and i want to add 1 server bl460c G7, when i try to power on, server cannot be power up.
for the information the all firmware have been updated
Enclosure : 3.20
iLO3 : 1.16
Virtual Connect : 2.33


Any solution for this case ???



Thank's


Thaufik
Thanks & Peace

Thaufik Jonhar
7 REPLIES
Johan Guldmyr
Honored Contributor

Re: BL460c G7 cannot power on

Hey!

Do you have enough power for this extra server?
Do you see any information at all about the server in OA?
Have you tried more than one bay?
Have you updated the BIOS as well?
Thaufik
Occasional Advisor

Re: BL460c G7 cannot power on


Do you have enough power for this extra server?
Yes, i have enough power.
Do you see any information at all about the server in OA?
No information critical about firmware status
Have you tried more than one bay?
Yes, i already change the position of server t another bay, but problem still same
Have you updated the BIOS as well?
The BIOS update has the last update..

have you solution for this task...??
whether i must update the OA firmware??


Kindly Regards...
Thanks & Peace

Thaufik Jonhar
Johan Guldmyr
Honored Contributor
cjb_1
Trusted Contributor
Solution

Re: BL460c G7 cannot power on

VC firmware been updated? 460 G7 needs at least 3.10 according to this:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-164da8fa304742c1b26ba71407&taskId=135&swLang=8〈=en&cc=us&mode=5&
Thaufik
Occasional Advisor

Re: BL460c G7 cannot power on

HI cjb,

VC firmware is 2.33
I think so too, it seems i have to update the vc to be 3.10...

i will notify you if it is succesfull.

Thanks guys for your cooperation
Thanks & Peace

Thaufik Jonhar
JKytsi
Honored Contributor

Re: BL460c G7 cannot power on

update to latest 3.18
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
ruffyba
Occasional Visitor

Re: BL460c G7 cannot power on

If your Vc Manager Firmware version is below 3.1xxxx your BL460c G7 may not power up.

Thus you need to update your VC Manager firmware to 3.10 or latest.

This should be okkay.