HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c G7 to VC FlexFabric to Cisco Nexus 5000 Question

 
VMSE
Occasional Contributor

BL460c G7 to VC FlexFabric to Cisco Nexus 5000 Question

Hi all,
I have configured the Cisco Nexus connection to HP CNA LOM ports for FC SAN. I am wondering if it is any different for connecting to iSCSI instead.

When using a FC SAN, Cisco Nexus can be configure as a Virtual group that binds the virtual FC and data ethernet to a physical port that in turn connects to a CNS port on the blade server. What if I am using iSCSI instead? obviously I dont need to bind the virtual FC interface anymore, do I just run the iSCSI through the data ethernet instead? Can I do hardware initiator to my iSCSI on the bl460 CNA LOM port?
Thanks!