HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c G9 - ILO VSP supports windows 2012 EMS mode if boot up in UFEI mode?

 
speedlyg
Occasional Contributor

BL460c G9 - ILO VSP supports windows 2012 EMS mode if boot up in UFEI mode?

Hi All,

 

My team needs connect ILO and uses VSP to manage windows in EMS(emergency management service) mode.

But VSP couldn't show "sac>" console correctly after windows boot up in UEFI bootmode.

 

NOTE: i tried the same configuraion below if installed win2012 in legacy boot mode. VSP showed "sac>" console correctly after windows boot up.

But if installed windows in UFEI mode. And VSP only could work before windows boot up.

 

Could anyone give me some idea on why this happens?

 

Details:

A bl460c gen9 server.

bios version: i36 v1.32 (3/6/2015)

 

windows 2012 installed in uefi mode.

Enabled win2012 ems by

bcdedit -store bcd /bootems {bootmgr} on

bcdedit -store bcd /bootems {default} on

bcdedit -store bcd /ems {default} on

bcdedit -store bcd /emssettings bios

 

And modified the bios setting

Virtual Serial Port: COM1,IRQ4

BIOS Serial Console Port: Auto

BIOS Serial Console baud rate: 115200

EMS Console: COM1,IRQ4

boot mode: UEFI