HPE Community
BladeSystem - General
1752808 Members
5653 Online
108789 Solutions
New Discussion

BL460c Wake-On-LAN Problem

 
A Shine
Occasional Contributor

‎03-05-2008 07:26 AM

‎03-05-2008 07:26 AM

BL460c Wake-On-LAN Problem

I have 6 BL460c G1's each fitted with an additional mezzanine NIC running VMware ESX. On 5 of the blades (spread across 2 blade enclosures) both the embeded and additional nic ports show as wake-on-lan enabled. On one of the blades only 2 of the nics are WOL. Do I have to turn on WOL in firmware to enable the other 2 ports? Or is this a known problem.

All the blades are running firmware dated 01/24/2008
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.