HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c Wake-On-LAN Problem

 
A Shine
Occasional Contributor

BL460c Wake-On-LAN Problem

I have 6 BL460c G1's each fitted with an additional mezzanine NIC running VMware ESX. On 5 of the blades (spread across 2 blade enclosures) both the embeded and additional nic ports show as wake-on-lan enabled. On one of the blades only 2 of the nics are WOL. Do I have to turn on WOL in firmware to enable the other 2 ports? Or is this a known problem.

All the blades are running firmware dated 01/24/2008