HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c and upgrading firmware

 
SOLVED
Go to solution
Azamat
Frequent Advisor

BL460c and upgrading firmware

Hi, all
I upgraded firmware by mounting FirmwareCD 8.5 iso in VirtualMedia and upgraded firmware on some blades 460c, and upgrading on some blades was gone normal. but when i upgraded firmware on another one (it was 7th blade, before 6 blades upgraded fine), it doesn`t work (in OnboardAdministrator blades shows by red and unknown, i cann`t ping iLO) , tried to reeject blade, and tried put this blade in another on enclosure, no luck. Tried put out battery from mother board of this blade, without luck. Can anybody advice me ,please?
2 REPLIES
Matti_Kurkela
Honored Contributor
Solution

Re: BL460c and upgrading firmware

Open a hardware support call with HP.

Even if you don't have a support agreement, the blade may still be covered by HP warranty.

MK
MK
Azamat
Frequent Advisor

Re: BL460c and upgrading firmware

ok , thanks