HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c iSCSI Boot Redundancy

 
Brett Sadler
Advisor

BL460c iSCSI Boot Redundancy

Is it possible to configure both iSCSI HBAs to be redundantly connected to the same LUN on our SAN (Equallogic). We have the QLogic QMH4062 adapters. I have no problem configuring the first HBA to boot from iSCSI SAN (we just use manual boot mode), but I want to make the second HBA teamed/redundant to the first. I've searched but have been unable to find an answer. If anyone could point me in the right direction or let me know how to do this it would be greatly appreciated. Thank you in advance!