BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL480c + RDP Netowrk Drivers

 
RHI-AD
Occasional Advisor

BL480c + RDP Netowrk Drivers

HI,

We are trying to roll out our OS to a BL480 using RDP. I have downloaded the NC326i drivers but when ever the NIC Drivers load i am getting:

Packet driver has not been loaded!!!

Change Computer Name to *******

NET0111: Error accessing NEMM.DOS. TCP 1.0 not loaded.

NET0111: Error accessing NEMM.DOS. Tiny RFC 1.0 not loaded.

We have a server that was built manually and i have noticed that 2 NIC's have one driver and 2 NIC's have a different driver.

Can anyone help me in chossing the correct driver so i can get these servers booting??
3 REPLIES
David Claypool
Honored Contributor

Re: BL480c + RDP Netowrk Drivers

You shouldn't need to hand-install a NIC driver if you have the correct version of RDP. Current version is 3.6 and should be a drag-and-drop function.
RHI-AD
Occasional Advisor

Re: BL480c + RDP Netowrk Drivers

This is when we are using PXE boot and using DOS. We are currently using the latest version of RDP (3.6)

Is the NIC already included? If so which one should i be using?
David Claypool
Honored Contributor

Re: BL480c + RDP Netowrk Drivers

Ah, that would be the issue. Your DOS jobs are still there because you have upgrade from previous versions. However, you need to be using the WinPE jobs supplied with newer versions of RDP. DOS is no longer supported.