HPE Community
BladeSystem - General
1752803 Members
5452 Online
108789 Solutions
New Discussion юеВ

BL495 loading RH 5u2

 
SOLVED
Go to solution
Mark Koenig (ISS SCI)
Occasional Contributor

тАО10-17-2008 08:46 AM

тАО10-17-2008 08:46 AM

BL495 loading RH 5u2

I'm trying to load a new BL495 with a 10g ethernet card. The drivers aren't included with RH5u2, but there is a driver disk released by HP, ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p299183725/v48649/bnx2x-1.45.11-rhel5.x86_64.dd.txt . The problem I have is that the 10g is the only card on the blade, so the only way to load this is using the virtual media. The virtual media "mount" doesn't want to recognize the driver disk.

Any clues?
Thanks!
Mark
0 Kudos
Reply
2 REPLIES 2
JKytsi
Honored Contributor

тАО10-17-2008 12:13 PM

тАО10-17-2008 12:13 PM

Solution

Re: BL495 loading RH 5u2

mount the disk before the OS installer starts. And use floppy image.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Reply
Mark Koenig (ISS SCI)
Occasional Contributor

тАО10-17-2008 02:09 PM

тАО10-17-2008 02:09 PM

Re: BL495 loading RH 5u2

Much appreciated!
That fixed it...

Mark
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.