BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL860C QMH2462 SAN Boot

Shift Support
Occasional Advisor

BL860C QMH2462 SAN Boot

Does anyone know where documenation is or how to configure the server (BL860c) to add a boot device from the SAN (using QMH2462 Qlogic FC adapter). I have seen the whitepaper but it does not say how to configure EFI
Thanks
1 REPLY
Torsten.
Acclaimed Contributor

Re: BL860C QMH2462 SAN Boot

Do you have hp-ux running?

If yes, you can use "setboot" to create EFI boot entries.

If you are on EFI, you need to do a "deep" scan of the SAN, see

http://docs.hp.com/en/AB587-96012/ch05s06.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!