BL860c server health led amber indicating.

[Viveki]

SAS disk status LED (right side one) flashing amber indicates a predictive failure. I doubt you will get a clue from the sasmgr command.

Better to log a case with your local HP support

[samrutia]

Hi,

As I donâ t have access to server as now, I will take some time to update logs.

Thanks
Sandeep.

[samrutia]

Hi,

SAS disk LED flashes is activity LED that flashing green. Status LED is not flashing.

It is a normal operation.

What is difference between other blades SAS activity LED flashing yellow and one blade SAS acidity LED flashing green.

Thanks
Sandeep.

[Viveki]

Hi,

Normally, most of the SAS disk LEDs are similar only. What is the model of the blade?

[samrutia]

Hi,

Model of blade is BL860c.

We have three blades is there,but in two blades LED flashing same like yellow and the other one's LED is flashing green. Not able understand scenario.If it is in normal condition than why it shows with green color and the other shows yellow?

Regards,
Sandeep.

[Viveki]

I told you already it indicates a predicitve failure (disk controller forseen a failure of the disk in future)

Please check the user manual as suggested before.

service guide can be found at http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01157868/c011578
68.pdf

The LED status for SAS disk can be found under Troubleshooting.

[samrutia]

Hi,

as i dont have MP uid and password,bt i can able to access server via root user.

So is any other way to get log?pls suggest.


Regards,
Sandeep.

[Torsten.]

Connect as root and run

# sasmgr get_info -D /dev/sasd0 -q raid

What do you get???

[Torsten.]

Default credentials for MP is Admin/Admin, but you should be able to connect without directly from OA.

[samrutia]

Hi,

SAS Disk ACTIVITY LED flashing green.

# sasmgr get_info -D /dev/sasd0 -q raid
Tue Nov 3 09:37:14 2009
---------- LOGICAL DRIVE 1 ----------
Raid Level : RAID 1
Volume sas address : 0x82b7830a7320bd6
Device Special File : /dev/rdsk/c8t0d0
Raid State : OPTIMAL
Raid Status Flag : ENABLED
Raid Size : 285948
Rebuild Rate : 0.00 %
Rebuild Progress : 100.00 %

Participating Physical Drive(s) :

SAS Address Enc Bay Size(MB) Type State

0x5000c5000a98429d 1 2 286102 SECONDARY ONLINE
0x5000c5000a988489 1 1 286102 PRIMARY ONLINE

We have total 3 blades(BL860C O.S. HP â UX 11i3).
Two bladeâ s SAS Disk ACTIVITY LED flashing yellow and other third blade with same configuration SAS Disk LED flashing green.

What is difference between yellow and green LED?

Regards,
Sandeep