HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

Bl460c G7 no power to HDD

Occasional Contributor

Bl460c G7 no power to HDD

The 15k SAS drives in one of my BL460c blades aren't getting any power, the lights never go on and they're undetectable. The problem is not with the drives, nor in the enclosure since other blades have no problem when putting them in the same bay. Bios been reset etc.

Has anyone had this problem or know where i might take a look to see damage or hardware disconnection?

Thank you,


Jimmy Vance

Re: Bl460c G7 no power to HDD

Have you made sure the drive backplane board is seated properly?  Maybe try switching drive backplane boards with  a known good node.

No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Contributor

Re: Bl460c G7 no power to HDD

Tried it, no luck, same issue.