HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade 460c G6 unable to install windows 2003 32 bit

 
flex10
Occasional Contributor

Blade 460c G6 unable to install windows 2003 32 bit

Dear All

We are facing a problem while installing windows 2003 32 bit, its not installing the PSP, and all the drivers shows yellow in the device manager, we tried to install it manuelly doesn't go, and we tried both smart staret 8.3 ND 8.2 , PLEASE advice

thank you
3 REPLIES
Magnus von Rosen
Frequent Advisor

Re: Blade 460c G6 unable to install windows 2003 32 bit

Are you sure you are using the correct version of smartstart, I mean the number of bits.
8.30 is only for 64 bits windows so that should react in about the way you are describing.
I know because I have "tried" this. :)
marcus1234
Honored Contributor

Re: Blade 460c G6 unable to install windows 2003 32 bit

from this page select latest firmware cdrom

then latest software cd rom (for drivers to be used inside windows...

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3884099&prodTypeId=3709945&prodSeriesId=3884098&swLang=13&taskId=135&swEnvOID=1005

enjoy points appreciated:)
JCChang
Occasional Visitor

Re: Blade 460c G6 unable to install windows 2003 32 bit

We have this symptom before,
but only NIC device all yellow.

you can "try remove all MEZZ card" and power on again.