HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade BL460c G1 in cluster

 
ITS
Occasional Visitor

Blade BL460c G1 in cluster

I have two servers blades BL 460c G1 in one enclosure, whith HP MSA 1000 to install in cluster. The operation systeme is suse 9.
I need any document to start the install.
where can I connect the hard beat cross over.
In the inclosure I have CF C chanel Qlogic
HP BLc Cisco 1 GbE...
2 REPLIES
JKytsi
Honored Contributor

Re: Blade BL460c G1 in cluster

you don't need to add cables because all connections are hardwired through signal midplane.

You can create a separate network for example your 2nd NICs belong to same VLAN and the primary data links are in other.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
sassou
Frequent Advisor

Re: Blade BL460c G1 in cluster

I have two servers blades BL 460c G1 in HP Blade System c7000 enclosure.
I need a good release of smart start to install the server.
The CD of smart start could not complete the configuration.
The controler is Smart Array E200i.