HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade Configuration Tool

 
Chrisb_6
Occasional Visitor

Blade Configuration Tool

Hi,

I am in the process a putting together a Design Proposal Solution. Is there an HP configuration tool for Blades that graphicly shows the back on a c7000 enclosure and the front of the c7000 enclosure where you can pick and choose your components that will be installed?
1 REPLY
Adrian Clint
Honored Contributor

Re: Blade Configuration Tool

There are tools where you choose the specification and it shows you a BOM and front & back views.
http://h71028.www7.hp.com/enterprise/cache/80364-0-0-0-121.html

Or you can use Visio shapes
http://www.visiocafe.com/hp.htm
Pick the HP-Blades zip and unzip it into Visio's My Shapes folder and then pick the c-c-class group.