BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

Blade System with KVM

Go to solution
Anubhav Dhingra
Frequent Advisor

Blade System with KVM


We have Bladesystem C7000 having KVM functionality in OA. Enclosure has 2 BL860 servers.

We have a TFT screen which is connected to Blade enclosure. We are not getting display on the TFT,
it was giving the messages that Blade servers not supported. We upgraded the firmware the firmware from 3.00 version to 3.10. Now it takes us to OA login screen in CLI mode. Please assist.
kris rombauts
Honored Contributor

Re: Blade System with KVM

The Integrity servers are not supported with the enclosures KVM.

Use telnet for the CLI or the iLO advanced IRC feature which is enabled by default for Integrity servers, this offers you a full graphics redirection (assuming you use an OS with graphics GUI interface like Windows).


Anubhav Dhingra
Frequent Advisor

Re: Blade System with KVM

Thanx Kris,

I was thinking of the same, that if Integrity Blades are supported. How about the new blades i2 series?