HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade chassis c7000, clear syslog for all blades

 
Vasili Melnic
Occasional Advisor

Blade chassis c7000, clear syslog for all blades

to see syslog for all blades in the chassis i run: show syslog server all (from OA)
is there is a command to erase all logs from every blade from the OA?
4 REPLIES
WFHC-WI
Honored Contributor

Re: Blade chassis c7000, clear syslog for all blades

Hi Vasili,

You can do this with RIBCL. It allows you to create an XML script, then push that script to all blades in an enclosure from the OA CLI using the HPONCFG command.

Check this guide, specifically the "CLEAR_EVENTLOG" section:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294268/c00294268.pdf

good luck
Vasili Melnic
Occasional Advisor

Re: Blade chassis c7000, clear syslog for all blades

it may work, do you have any examples of HPONCFG with RIBCL ?
Vasili Melnic
Occasional Advisor

Re: Blade chassis c7000, clear syslog for all blades

I kinda got it working:
my_dev> HPONCFG NOAUTOLOGIN all << <*>







<*>

Problem is, that it will not clear IML, only ILO2.
WFHC-WI
Honored Contributor

Re: Blade chassis c7000, clear syslog for all blades

Sorry, I misunderstood the question. To clear the IML logs you can use the tool:

CPQIMLV

which is located in the directory:

\Program Files\Compaq\Cpqimlv

by default.

Use the -m switch to connect to remote machines and use the -clear switch to delete the IML entries. Keep in mind this is an unrecoverable action...

good luck, points are appreciated if the answers help!