HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade local disk

 
Shane McAnuff
Occasional Advisor

Blade local disk

I have some blade server, one of them I was setting up boot from SAN but I took out the local disk when I was config the OS to boot from SAN, now When I replace the two local disk the server don't see them and I am not getting any light on the two local disk. I have a HP ProLiant BL460c.
4 REPLIES
Jimmy Vance
HPE Pro

Re: Blade local disk

Did you disable the embedded disk controller?



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Shane McAnuff
Occasional Advisor

Re: Blade local disk

no I did not but how can I look to see if it is disable?
Víctor Cespón
Honored Contributor

Re: Blade local disk

Do you see the Smart Array E200i message on boot? In this model it's common that the hard disk backplane and controller board becomes dettached from motherboard and the controller does not init.
Shane McAnuff
Occasional Advisor

Re: Blade local disk

When I reboot the server I don't see the Smart Array E200i message on boot, how can I fix this?