BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade server rack move

Shah Gaurang B.
Frequent Advisor

Blade server rack move

Hi Experts,

I have to move one BL60 model rack from one location to another location and I am very new about Blade servers.

Can anyone help me what precautions are require like FC connection, Network connection and how to check.

I know about Rp and Rx series of serves.

Thanks in advance.
4 REPLIES
Torsten.
Acclaimed Contributor

Re: Blade server rack move

Hope this helps:

http://docs.hp.com/en/hw.html#HP%20Integrity%20BL60p%20Server%20Blade


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Prashanth Waugh
Esteemed Contributor

Re: Blade server rack move

Hi Gaurang,
Following are the precaution and take the o/p of following commands


1)strings /etc/lvmtab
2)ioscan -fnC disk
3)ioscan -fnC processor
4)glance -m
5)vgdisplay -v
6)ioscan -fnC lan
7)ioscan -fnC fc
8)ioscan -fnC tape
9)ioscan -fnC autoch
10)make a diagram how the power connection are made.There should be redundancy.
11)mark all the netwok cables using marker how the connection are going.make a diagram

Regards
Atulkumar
For success, attitude is equally as important as ability
Steven E. Protter
Exalted Contributor

Re: Blade server rack move

Shalom,

Assuming you are not actually changing the network information there is little you must do.

For important servers, I'd have an Ignite make_tape_recovery or make_net_recovery done in case someone gets butter fingers and drops the whole thing.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Prashanth Waugh
Esteemed Contributor

Re: Blade server rack move

hi ,

Also take the output of
# ioscan -fnCfc
#fcmsutil

Pls check the manpages for above command

Regards
Atul
For success, attitude is equally as important as ability