HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

Brocade 4/12 Link errors

Regular Advisor

Brocade 4/12 Link errors

Hi everyone,

When logging on to my 2nd Brocade switch i notice all ports have Link failures somewhere around 10/20.

Now this could be normal i guess... but one of them has about 600.000 link failures!

What does this mean and what do you all advice?

Honored Contributor

Re: Brocade 4/12 Link errors

Have you checked that cables are _properly_ attached to switch and servers ?

clear the error counters from CLI
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Regular Advisor

Re: Brocade 4/12 Link errors

The port that reports this issue is port 2 on the Brocade, which is an internal port connected to Blade 2.

I'll clear the stats and see what happens, i just enabled the port again.