HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Brocade and Cisco SAN switches

 
Aamir Majeed
Advisor

Brocade and Cisco SAN switches

Hi,
I want to clarify that, can we install two different SAN switches in same interconnect bay pair of c7000 enclosure i.e. cisco MDS 9124e san switch in interconnect bay 3 and brocade san switch in interconnect bay 4.
1 REPLY
Adrian Clint
Honored Contributor

Re: Brocade and Cisco SAN switches

Aamir,

There is nothing to prevent you doing this and I dont beleieve there is anything that immediately will not work. It only could be an issue for the support of the HBA driver or multipathing software.
Basically its the same as if you were using rackmount servers and standalone switches.