BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

C-3000 Enclosure upgrade from Single OA to Dual OA

Ernesto
Occasional Visitor

C-3000 Enclosure upgrade from Single OA to Dual OA

Hi, 

 

I am trying to find out what the correct part is to upgrade to a dual OA,  I have looked at some posts and they suggest part 590863-b21, When I look for that part on the Hp Website  it looks only like a single OA module  with a rj45 connection on the front., it does not show any thing about a sleeve that can hold two OA modules.

 

Is there a separate part (sleeve )that we need to also get that will replace the current Single OA 461514-b21.. so that we can install two 488100-B21' s?

1 REPLY
DanRobinson
Frequent Advisor

Re: C-3000 Enclosure upgrade from Single OA to Dual OA

c3000 OA is totally different than c7000 OA.

For the c7000, the OA Sleeve comes with the enclosure and the 2 OAs generally use the exact same part number.

for the c3000, the first OA comes with the sleeve as an integrated unit, and the redundant (2nd) OA is a smaller module that just snaps into the sleeve. The c3000 OA (as far as I remember) does NOT have any ethernet connections on it. these are on the back of the enclosure top right (rackmount mode).