1748230 Members
4183 Online
108759 Solutions
New Discussion

Re: C 7000 blade

 
omz
Occasional Contributor

C 7000 blade

Hello i have C 7000 blade with 2 flex fabric 10 GB/24 module and 8 server BL 460 gen9 my probleme is connect this with MSA2040 and SWITCH SN3000B i don't show FibreChannel  module in VC Manager and when i connect SFP + to flex incompatible message or mismatch notification show

1 REPLY 1
JeroenKleen
Frequent Advisor

Re: C 7000 blade

Hello OMZ,

It could be that you might be mixing up Ethernet and  Fiber Channel connectivity? 
Are you connecting the MSA2040 over Ethernet or Storage Fiber Channel? 
Please check the supported stream (SPOCK) and the supported SFP's on the Virtual Connect quickspecs to match the right SFP to be used at the Virtual Connect module. Please keep in mind that for Storage Fiber channel you would need the HPE FlexFabric module as the standard Etherner VC module would only provide iSCSI support (over an 10Gb Ethernet SFP+  SFP)..

Does this help you? Best Regards, jeroen

 

Working at HPE Pointnext Cloud CoE as HPE OneSphere multi-cloud Evangelist