BladeSystem - General
1747985 Members
4998 Online
108756 Solutions
New Discussion юеВ

Re: C-class OA USB and DVD

 
SOLVED
Go to solution
James ~ Happy Dude
Honored Contributor
Solution

Re: C-class OA USB and DVD

what about LCD screen ?

Regards,
James.
xxzab
Advisor

Re: C-class OA USB and DVD

it works from the insight display
xxzab
Advisor

Re: C-class OA USB and DVD

But in the OA its listed the same but shows the blade is now connected to the enclosure DVD. Cant connect or disconnect it from the OA
James ~ Happy Dude
Honored Contributor

Re: C-class OA USB and DVD

I See ! interesting;

I am out of ideas at the moment. will update u if I have something. sorry bro !

Perhaps, someone else can shower his divine light to this issue !??!

Regards,
James.
Raghuarch
Honored Contributor

Re: C-class OA USB and DVD

Hi,

YOu mention LCD is working fine.
But the LCD screen You have attached doesn't show it.

Can you please check
Go to the Main Menu in LCD.
Select enclosure settings.
YOu should be getting no media for the bays in which you have serves and absent for the bays in which you don't have servers.
If you see No Media Drive was not recognized by OA.
Please refer to screen shot.

Try to connect using LG or HP USB-drives if you have any.

Regards,
Raghuarch
Raghuarch
Honored Contributor

Re: C-class OA USB and DVD

Hi,

You can try this from CLI Telnet or ssh to OA.

Below is the command.

SET SERVER DVD [ CONNECT | DISCONNECT ] [ ALL | {[ , | - ] number>}]: Connect or disconnect the specified server or range of servers from
the enclosure DVD drive. DISCONNECT will detach any URL in addition to
"Enclosure DVD".

Regards,
Raghuarch
xxzab
Advisor

Re: C-class OA USB and DVD

My problem is fixed, When you add a DVD/CD drive to the OA, the three things you will need to do is:

1. put a cd/dvd in the unit(needs to be in unit)
2. select the 'Refresh' button at the bottom of the screen, this will
re-detect the device.
3. select at least 1 server before you select the 'DVD' button(other
wise they will be greyed out)
James ~ Happy Dude
Honored Contributor

Re: C-class OA USB and DVD

Thanks for updating !

Points to REMEMBER;

Regards,
James.
Ervinck Kevin
Valued Contributor

Re: C-class OA USB and DVD

When I try to add my DVD-drive into our C3000 enclosure it doesn't detect the drive.

OA-001A4BEFFC31> set server dvd connect all

Bay 1 - No DVD media or DVD drive present.
Bay 2 is empty.
Bay 3 is empty.
Bay 4 is empty.
Bay 5 - No DVD media or DVD drive present.
Bay 6 is empty.
Bay 7 is empty.
Bay 8 is empty.

When you put the DVD drive into the C3000 you can see it is provided with power. I also put a DVD bootable media in it but to no avail.
Also via the display I cannot add the DVD drive to one or more bays.
Ervinck Kevin
Valued Contributor

Re: C-class OA USB and DVD

Just for information. After powering off the complete C3000 enclosure and rebooting again we saw that the DVD drive was detected this time.

However the DVD-drive was already installed when we first booted the server with all hardware mounted (switches, psu, fans, blades and dvd-drive).