HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

C3000 & BL460C network questions

 
IanSnow
Occasional Visitor

C3000 & BL460C network questions

New to blades, I know only 2 of the 4 ports are available on the half height enclosure. my question is, why can't I utilize the FlexFabric 10GB ports for regular traffic? we don't use iscsi or FCoE. I need more than 2 adapters in each blade, what are my options? enclosure has 2 3120x switches in it

3 REPLIES
Torsten.
Acclaimed Contributor

Re: C3000 & BL460C network questions

The BL460c Gx has 2 LOMs, both connected to interconnect bay 1 to ports N and N+8 (N is the server bay).

 

For a connection to other interconnect bays you need mezzanine cards.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
IanSnow
Occasional Visitor

Re: C3000 & BL460C network questions

It has mezz card. there's a total of 6 connections showing, 4x NC325m (only 2 of which are accessible because it's a half height enclosure) and 2x NC553i FlexFabric 10GB.   the 10GB connections show as "unidentified network" and do not receive an IP via DHCP nor do they work if I set them staticly.

Torsten.
Acclaimed Contributor

Re: C3000 & BL460C network questions

How it works:

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!