HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

C7000 Blade enclosure Power Requirements

 
SOLVED
Go to solution
Mike McGough
Occasional Contributor

C7000 Blade enclosure Power Requirements

My customer in the UK will have 3 C7000 enclosures in a single cabinet. They are considering using 2 x HP 22 kVA S332 Monitored PDU- single input, 3?, 32A (INTL) (3 phase input with 12 x Colour Coded C-19 outlets) to power all 3 enclosures. would you recommend this solution
3 REPLIES
V Deepak Kumar
Regular Advisor
Solution

Re: C7000 Blade enclosure Power Requirements

I could not upload the docs because they are huge.
1. Go to HP.com
2. Search for c7000+Power+Requirements
3. Look for pdf docs
"HP BladeSystem c7000 Enclosure Setup and Installation Guide"
and

"HP BladeSystem c-Class Site Planning Guide"

These docs describe in detail about Power requirements of a c7000 enclosure.
Hope this helps.
Thanks
Deepak
Performance is compulsion and not an option if my existence is to be justified.
Mike McGough
Occasional Contributor

Re: C7000 Blade enclosure Power Requirements

Thank you for your reply. Very useful.
V Deepak Kumar
Regular Advisor

Re: C7000 Blade enclosure Power Requirements

Points ? ;)
Performance is compulsion and not an option if my existence is to be justified.