BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

C7000 OA SNMP SysName is wrong

jowillia
Frequent Advisor

C7000 OA SNMP SysName is wrong

Hi,

On about half of our OAs the configured SNMP system Name is not the name that is retrieved when polled.

The polled name is like OA-<mac address>

In the SNMP config under enclosure settings the SNMP system name is something like DC1-BLD1-OA1

I have tried bouncing SNMPd , changing OA and enclosure names and back again etc. Nothing works.

 

2 REPLIES
jowillia
Frequent Advisor

Re: C7000 OA SNMP SysName is wrong

firmware version is 3.60

jowillia
Frequent Advisor

Re: C7000 OA SNMP SysName is wrong

..and we also see the same issue with firmware version 4.11