C7000 Onboard Administrator Replacement with Used Part

[jkg1138]

If replacing a failed OA with a used OA, will the configuration of the active OA over-write the configuration of the standby OA (replacement)?

[ManBha · Accepted solution]

Hello,

Please do refer the below guide. 

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001052en_us&page=index.html

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.

Thanks.

[jkg1138]

Thanks for your reply.  Apologies for not being more specific.  I want to be sure that the active OA will over-write the configuration of the replacement so not to cause any interruption to the chassis.  I have read the document on how to replace the OA but it isn't specific enough to answer this question.  The user manual covers how to reset the OA but I don't think that should be done on a live chassis.

[ManBha]

Hello,

Refer the below link: 

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001052en_us&page=index.html

Thanks.

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.