BladeSystem - General

Re: C7000 Onboard Administrator Replacement with Used Part

 
SOLVED
Go to solution
jkg1138
Occasional Visitor

C7000 Onboard Administrator Replacement with Used Part

If replacing a failed OA with a used OA, will the configuration of the active OA over-write the configuration of the standby OA (replacement)?

3 REPLIES 3
ManBha
HPE Pro
Solution

Re: C7000 Onboard Administrator Replacement with Used Part

Hello,

 

Please do refer the below guide. [ Page 11]

 

https://www.karma-group.ru/upload/iblock/a87/HPE-ONBOARD-ADMINISTRATOR.pdf

 

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.

 

Thanks.

I work for HPE

Accept or Kudo

jkg1138
Occasional Visitor

Re: C7000 Onboard Administrator Replacement with Used Part

Thanks for your reply.  Apologies for not being more specific.  I want to be sure that the active OA will over-write the configuration of the replacement so not to cause any interruption to the chassis.  I have read the document on how to replace the OA but it isn't specific enough to answer this question.  The user manual covers how to reset the OA but I don't think that should be done on a live chassis.

ManBha
HPE Pro

Re: C7000 Onboard Administrator Replacement with Used Part

Hello,

 

This information is available on page 11.

https://www.karma-group.ru/upload/iblock/a87/HPE-ONBOARD-ADMINISTRATOR.pdf

 

 

Thanks.

 

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.

 

I work for HPE

Accept or Kudo