HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

C7000 Power Redundant Question

 
alantang_hkg
Occasional Visitor

C7000 Power Redundant Question

Hello:

 

I have C7000 Enclosure with 6 power supply. (1-6)

 

Power Supply 1-3 connect to power Source A

Power Supply 4-6 connect to power Source B

Enclosurepower Redundant Config as "AC Redundant"

 

May I know does this config will not cause outage when either Power Source A or B out of power?

 

Thanks!

2 REPLIES
Psychonaut
Respected Contributor

Re: C7000 Power Redundant Question

The answer is yes.

 

AC Redundant: In this configuration N power supplies are used to provide power and N are used to provide redundancy, where N can equal 1, 2 or 3. When correctly wired with redundant AC line feeds this will ensure that an AC line feed failure will not cause the enclosure to power off.

 

Since you have it configured this way you can lose one side or the other and the servers will stay online.

alantang_hkg
Occasional Visitor

Re: C7000 Power Redundant Question

Thanks a lot!