HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

C7000 and BL460cG7 fencing and also management ILO3 usage

Occasional Visitor

C7000 and BL460cG7 fencing and also management ILO3 usage

Hi all,
in duble C7000 enclosure i need to use ILO3 at the same time for external management (out-of band management using a customer dedicated network subnetting) and for internal fencing redhat cluster functions using internal system vlan

Is this possible ?
my i use On Board Adminisrator port for management with customer ip address subnetting and internal ILO3 interconnection (my own subnetting vlan) using the cisco integrated ip switch ?
Having two enclosure also i need to connect the On Board Administrator using the dedicated ports ?
thanks in advance

Re: C7000 and BL460cG7 fencing and also management ILO3 usage

With two enclosures, you can link them togehter using the Enclosure Link Connections. After they are connected, you will be able to manage both enclosures from a single OA connection.

When you connect to the OA, you will see both enclosures and you will have to check the enclosure (the one your NOT logging directly in to) and both will be presented in the OA display.

As for the Vlan question, I'm thinking I read somewhere recently in this forum that it wont work (if I understand the way you are presenting the question) but I'm not 100% sure.