HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

C7000 chassis threshold settings.

Trusted Contributor

C7000 chassis threshold settings.

Jenny had a customer question on the c7000:





On the C7000 chassis can the thresholds be adjusted for monitoring alerts, i.e. setting the warning temp lower?   Our facilities is setting up monitoring of the chassis via a custom Telnet script and want to test out the data they receive.  I haven’t been able to find a way to set it, so I’m wondering if it something that could be hard set and can’t be change?




Monty replied:




The thresholds are set on each device and cannot be changed.


You could use a heat source, (very carefully) in front of the enclosure to test server thermal thresholds and the Onboard Administrator response.




Comments or suggestions for Jenny?