BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

C7000 port mapping for interconnect bay 5&6 7&8 using Mezz slot2

 
SOLVED
Go to solution
Highlighted
Occasional Contributor

C7000 port mapping for interconnect bay 5&6 7&8 using Mezz slot2

if i have network switches in bays 5 and 6 and add 1gb pass thrus in 7 and 8 and  add a  1gb 4port nic 366m in mezz slot2 can ports 1 and 2 which are connected to bay 5 and 6 be disabled from the OA blade port mapping view checkbox?

 concern is disrupting network switches in bay 5 and 6 when installing passthrus for newly installed bl460's

2 REPLIES 2
Highlighted
Acclaimed Contributor
Solution

Re: C7000 port mapping for interconnect bay 5&6 7&8 using Mezz slot2

>> disabled from the OA blade port mapping view checkbox?

 

No, this is viewing only.

You may consider to disable the related switch ports.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Occasional Contributor

Re: C7000 port mapping for interconnect bay 5&6 7&8 using Mezz slot2

thank you