BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

C7000 power management change

wbmd
Occasional Contributor

C7000 power management change

Greetings,

I was interested in knowing if anyone has ever changed the power management from Power Supply Redundant(3 plus 1 configuration) to an AC Redundant (2 plus 2 configuration) on an enclosure while the enclosure is actively supporting blades. Is this change something that can happen transparently to the blades/ interconnects?

NOTE: (OA rev = 3.11)
2 REPLIES
Steven Clementi
Honored Contributor

Re: C7000 power management change

As far as I can remember, power management changes happen real-time and do not effect running blades/interconnects.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Bhavin-Desai
Advisor

Re: C7000 power management change

This setting can be done online provided you are running firmware levels are per the support matrix and power is sufficient in the enclosure to run on AC redundant..

Additionally you might also need to understand the functionality of PSUs in AC redundant in order to use it.