BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Can I Configure Which PSU is used for Primary and Secondary? (C7000)

 
rboelens
Occasional Contributor

Can I Configure Which PSU is used for Primary and Secondary? (C7000)

I have a C7000 BladeCentre with an A and B Power Feed going to a 208/240v Single Phase Power Module with all 6 PSUs Populated in Redundant Mode (3+3)

It costs me significantly less to use my A feed per Kw/h than to use my B feed due to the A feed being supplimented by the building's Solar, which obviously will be a problem each day when the sun goes down.

So, what I would like to do is, somehow configure the chassis to prioritize drawing power from Line A (PSUs 1, 2 and 3), and when that drops at sundown, switchover to Line B (PSUs 4, 5, 6) during the night.

Is this possible? If so, how can I configure it to do so?