Can I use 2 nic on half hight blade with single vc-enet

[natwasu]

I have c7000 with 2 vc-enet module on bay1 and 2 with 16 half high server blade.

Quickspec said nic1 only connect to vc-enet on bay1 and nic2 only connect to bay2. Can I use both nic if I have only on vc-enet on bay1

Thank

[JKytsi · Accepted solution]

No.

[JKytsi]

And here You can find the documents to proof it =)

http://h18004.www1.hp.com/products/blades/components/c-class-tech-function.html

[JKytsi]

And as a new user to forum. Start assigning points to answers which people provide to HELP YOU.

[Adrian Clint]

As the man says No.
Someone may have been confused and been talking about the c3000. Where Nic 1 & 2 connect to Interconnect 1.

[The Brit]

Didn't your original post say you have VC-ENet modules in both Bay 1 and Bay 2??

So what are you considering doing??

Dave.

[natwasu]

Yes Accualy I have 2 vc-enet per enclosure but I saw some document that make me confuse. But I am very clear right now many thank

[JKytsi]

Dear Natwasu,

Please read this forums etiquette.

http://66.34.90.71/ITRCForumsEtiquette/after.html

If You want to receive help in the future too.

[natwasu]

Hi I am so sorry I am newbie for this forum. Thank you very much for your advice

[JKytsi]

No problem. But in the future, save 10 points to really good answers = the one which resolved the problem.