HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Can I use 2 nic on half hight blade with single vc-enet

 
SOLVED
Go to solution
natwasu
Occasional Advisor

Can I use 2 nic on half hight blade with single vc-enet

I have c7000 with 2 vc-enet module on bay1 and 2 with 16 half high server blade.

Quickspec said nic1 only connect to vc-enet on bay1 and nic2 only connect to bay2. Can I use both nic if I have only on vc-enet on bay1

Thank
9 REPLIES
JKytsi
Honored Contributor
Solution

Re: Can I use 2 nic on half hight blade with single vc-enet

No.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
JKytsi
Honored Contributor

Re: Can I use 2 nic on half hight blade with single vc-enet

And here You can find the documents to proof it =)

http://h18004.www1.hp.com/products/blades/components/c-class-tech-function.html
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
JKytsi
Honored Contributor

Re: Can I use 2 nic on half hight blade with single vc-enet

And as a new user to forum. Start assigning points to answers which people provide to HELP YOU.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Adrian Clint
Honored Contributor

Re: Can I use 2 nic on half hight blade with single vc-enet

As the man says No.
Someone may have been confused and been talking about the c3000. Where Nic 1 & 2 connect to Interconnect 1.
The Brit
Honored Contributor

Re: Can I use 2 nic on half hight blade with single vc-enet

Didn't your original post say you have VC-ENet modules in both Bay 1 and Bay 2??

So what are you considering doing??

Dave.
natwasu
Occasional Advisor

Re: Can I use 2 nic on half hight blade with single vc-enet

Yes Accualy I have 2 vc-enet per enclosure but I saw some document that make me confuse. But I am very clear right now many thank
JKytsi
Honored Contributor

Re: Can I use 2 nic on half hight blade with single vc-enet

Dear Natwasu,

Please read this forums etiquette.

http://66.34.90.71/ITRCForumsEtiquette/after.html

If You want to receive help in the future too.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
natwasu
Occasional Advisor

Re: Can I use 2 nic on half hight blade with single vc-enet

Hi I am so sorry I am newbie for this forum. Thank you very much for your advice
JKytsi
Honored Contributor

Re: Can I use 2 nic on half hight blade with single vc-enet

No problem. But in the future, save 10 points to really good answers = the one which resolved the problem.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi